How to maintain CO2 laser engraving and cutting machine in summer?

Laser engraving and cutting machine, just like we use computers, also needs to be cleaned regularly to ensure high-speed and high-quality operation. Unlike computers, laser machines do not have 360 or computer stewards, so how should they be cleaned? The editor will teach you how to maintain:

How to maintain the laser cutting machine

1. Firstly, the lens should be wiped and cleaned regularly. It is recommended to wipe every week according to its processing strength. Engraving, wood processing customers, cleaning times need to be frequent. Otherwise, it will affect the cutting effect and cutting speed.

2. Regular track care, once every six months. It is forbidden to use edible oil when applying lubricating oil to the track. Industrial lubricating oil is required.

Customers such as garment processing and plush cutting need to pay more attention to track cleaning. It is recommended to clean the track in time after each processing.

3. Replacement of cooling water. The customer using the water pump should ensure that the water in the bucket is clean, and avoid the entry of dirt, otherwise it will enter the laser tube, resulting in the normal light out of the laser tube. In the hot summer, customers should change the water once a month to ensure the cutting and carving effect.

4. If the laser machine is not used for a long time, drain the water in the laser tube and wrap the machine.

Laser cutting machine and laser cutting machine make our work easier and make our products more refined. We should also cherish the machine.