Q: Can Suzhou laser cutting machine cut MDF?

Answer: Laser cutting machine can cut MDF. However, due to the different materials of MDF, not every MDF can be cut by laser. Some MDFs contain too much iron debris, soil, and other impurities that are not suitable for cutting with a laser. Other MDFs are not dense enough and are not suitable. There are several types of MDF that can be cut by laser cutting machines, such as Aosong board, poplar board, and washed board. Among them, Osong board is preferred.

Q: How thick is the MDF for a laser cutter?

Answer: The thickness of the laser cutting MDF is related to the power of the laser. The higher the laser power, the thicker the MDF that can be cut. Commonly used MDF thickness is 6mm, 12mm, 18mm and so on.

Q: What is the cutting speed?

Answer: The thickness of the laser cutting MDF is related to the laser power and the thickness of the plate. The higher the power of the laser cutting the same density plate of the same thickness, the faster the cutting speed.

150 W carbon dioxide laser cuts 12mm Auzon board at a speed of 7mm-12mm per second;

A 280 watt carbon dioxide laser cuts 12mm Auson boards at a speed of 16mm-25mm per second; a 1000 watt carbon dioxide laser cuts 12mm Auson boards at a speed of 20mm-40mm per second.

Q: Can laser cutting machine draw lines on the surface of MDF?

Answer: Yes.

Q: What is the speed of drawing lines?

Answer: The speed at which the laser cutting machine draws lines is related to the structure of the machine itself. Generally speaking, between 100 mm and 500 mm per second. Some mechanical limitations of the machine itself may limit line speed and idle speed to less than 100 mm per second.

Q: What is the relationship between the width of the cutting gap when the laser machine cuts the MDF? *

Answer: It is related to the size of the laser spot and the focal length of the focusing lens, and it is also related to whether the cutting surface is in focus. The larger the laser power is, the larger the emitted light spot is, and the larger the cutting gap is. Which power is suitable, we have done a detailed comparison and research, you can contact customer service for consultation.

Q: What does the thickness of the lines have on the surface?

Answer: It is related to the laser power, the focal length of the focusing lens, whether it is in focus, and the laser brand.

Q: Why is the thickness of the line drawn by the laser cutter I use uneven?

Answer: One kind of situation is that the platform of the machine itself is uneven or the plate being cut is uneven, which causes the height of the laser head to be cut from the cutting surface. The other type of laser has unstable power and is weak when it emits light.

Q: Why can't I cut through some places when I cut MDF?

Answer: This situation usually occurs on low-power laser cutting machines. When a 150 watt carbon dioxide laser is cutting a density board, this situation will occur if the optical path is not adjusted or the machine platform is not leveled. In addition, this situation will also occur when the laser power is reduced after a period of time.

Question: Why is the cutting surface of my machine cutting MDF very dark, and the powder is severe when I rub it?

A: It has something to do with the density board material. It is recommended to change to Aosong board or other materials. Aosong board not only has a fast cutting speed when laser cutting, but also the density board itself is high density. After the laser is burnt, the surface oil will form a natural protective film. The surface is easy to wipe and moisture-proof.

Q: Why are there small holes on the cutting surface of my machine cutting MDF?

Answer: The density of the sheet itself is low.

Q: Why is the cutting surface of my machine cutting MDF not vertical?

Answer: The light path of the machine is not adjusted properly and needs to be adjusted again. Machine table is uneven, re-level.

Q: Why doesn't my machine cut through the MDF completely and the bottom is stuck?

Answer: The power of the machine has dropped, and a new laser needs to be replaced; the laser light path is not adjusted properly, re-dim; the density board material; the machine platform is leveled again

Having said so much, everyone must have a better understanding of the cutting of MDF by acrylic laser cutting machine. The MDF cutting industry is currently applied to the Korean crystal photo frame industry.