Hello, welcome to visit Suzhou Yiqiang Laser!

How to increase the marking speed of fiber laser marking machine?

Your current location: Home >> News >> Industry information

How to increase the marking speed of fiber laser marking machine?


The fiber laser marking machine is produced to make the production efficiency of the enterprise higher. The speed of the fiber laser marking machine directly affects the production efficiency, so we have to study carefully how to improve Speed of fiber laser marking machine.

Mini split fiber laser marking machine

First, the workpiece itself will affect the speed of the marking machine. In addition, the laser frequency, amplitude, laser power, laser beam and air blowing of the machine itself will affect the working efficiency of the fiber laser marking machine, which requires us When purchasing the equipment, inform the manufacturer of the detailed requirements in order to select the appropriate model.

The internal factors are mainly the laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping, and auxiliary gases and materials during processing. The internal factors are mainly noticed in the selection of the previous models, and the laser engineer's advice should be followed to select them.


Another factor that customers need to pay attention to when processing is mainly the marking density, marking format, marking depth and laser spot size.

Marking density

The higher the compliance density is set, the slower the compliance speed under the same conditions. Therefore, it is recommended to choose a suitable compliance density.

Marking format

Because the deflection area of the large format marking galvanometer is increased, the large format marking speed is slower than the small format marking speed.

Marking depth

According to requirements, the depth of the workpiece that needs to be marked needs to be adjusted to the parameters of the marking machine, which will also affect the working speed of the fiber laser marking machine.

V. Laser spot size

A small light spot also means that the marking volume is small and the speed is slow. On the contrary, the faster the standard is achieved.

The above is how the laser cutting machine manufacturer in Suzhou tells you how to improve the marking speed of the fiber laser marking machine. To make the fiber laser marking machine work more efficiently, you need to carefully observe these factors in production. Under the premise of guaranteeing the production quality, the production speed should be increased as much as possible.

Recently Viewed:

contact us

Mobile: 18662113123

Tel: 0512-63988785

Website: www.szyqtech.com

Address: No.159, Qingyang Road, 

               Wujiang District, Suzhou

WeChat customer service
Official website of mobile phone