Improper software programming may cause discontinuities in template cutting. In the cutting process, the distance between the cutting head and the workpiece is very close. When cutting multiple parts of the steel plate, the laser program defaults to scribe first and then cut to avoid the cutting head colliding with the cut off metal piece, which makes the cutting head and the machine unnecessary. Damage. If the closed area is not closed when the laser program is compiled, the local steel plate is connected to the whole after cutting, and manual cutting will easily damage the sample and cause scrap. The ventilation of the auxiliary gas during the laser cutting process can also cause discontinuities in cutting. Acrylic laser cutting machine manufacturers have suggested that the auxiliary gas mainly blows the molten metal out of the slit during the processing. When the auxiliary gas is used, the device automatically stops moving, etc. After the gas replacement is completed, the cutting trajectory is slightly different from the trajectory when stopping, resulting in discontinuous cutting trajectories.

How to avoid cutting discontinuities

The Suzhou laser cutting machine manufacturer tells you that to solve the problem of laser cutting discontinuity, it is necessary to solve the cause of the cutting discontinuity. The cutting discontinuity caused by programming requires that the design and test personnel have high professional quality. During the programming process, Check carefully to prevent errors. In addition, experienced laser cutting operators can effectively avoid cutting discontinuities in actual operation. The cutting discontinuity caused by auxiliary gas can be reduced after the gas bottle is replaced. Maintains cutting effect. This method can be used in many materials, but you must strictly follow the operating instructions to avoid errors.